Filter By:
- Parts & Accessories (50)
- Pedals (164)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Pedals
$33.00
- Works with all XPRO and XPRESSO pedals.
- Not included with new XPRO and XPRESSO pedals.
- This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$33.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range.
- They allow angular and lateral freedom in order to respect the natural movements of your legs and joints.
- You can also adjust the Q-factor (by switching the cleats)
- The Bi-material brings more durability when walking with the cleats.
- These cleats are the stock cleats included with all XPRO & XPRESSO pedals.
$33.00
- Works with all RXS and Impact pedals.
- Five degrees of heel float and 2.5mm of lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$25.99
Replacement cleats for RXS pedals, featuring "Cafe" profiling, which means that when you walk into your local coffee shop for a mid-ride refreshment, you don't risk slipping and falling on the tile floor.
$415.00
- Developed for the demands of professional Enduro racing, the SPECIALE 12 is made of a 6106-T6 aluminum
- A wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system combine to exceed the demands of the most advanced riders.
- TIME's renowned engagement system allows easy engagement with a positive, predictable entry and release, as well as a design that self-cleans even in the most difficult conditions.
$226.00
- Aluminum body that is slightly more compact than the SPECIALE 12, yet it offers a stable platform and four adjustable pins for optimal grip.
- The micro-adjustable tension clamping system allows riders to fine-tune the pedal function for their preferred riding style.
- TIME's patented clamping system allows for easy entry and positive, predictable release, as well as a self-cleaning design to ensure reliable performance in all conditions.
Specs:
- Pedal Material: Aluminum
- Pedal Weight: 196g
- Cleat Compatibility: ATAC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$98.00
- All of the technologies from the rest of XPRESSO line at an affordable price.
- The large platform, low stack height, and adjustable carbon blade tension make this a great pedal for all cyclists looking for pedaling comfort and efficiency without a high cost.
- If you're new to clipless pedals or have ever struggled to clip into your pedals, you'll love the ICLIC system, which features a pre-opened design that makes clipping in extremely easy.
Specs:
- Pedal Material: Composite
- Pedal Weight: 115g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$128.00
- Built for everyday use and features a stainless steel top plate and a hollow, steel axle.
- A low stack height, an oversized pedal platform, and a carbon blade with three tension settings make this a very comfortable and efficient pedal.
- The ICLIC system requires only a light step to clip-in, making it a very easy pedal to enter.
Specs:
- Pedal Material: Composite
- Pedal Weight: 115g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$189.00
- The only pedal in the XPRESSO line to use a carbon body.
- Hollow steel axle is light and durable at the same time.
- ICLIC system is a pre-opened design, making clipping in super easy.
- Carbon blade tension adjustment, a low stack height, and an oversized platform for pedaling efficiency and comfort.
Specs:
- Pedal Material: Carbon
- Pedal Weight: 99g
- Cleat Compatibility: ICLIC
- Spindle Material: Steel
- Pedal Bearing: Ball bearings
- Pedals Thread: 9/16"
$49.00
- Pedal Body Cover Cap Left/Right TIME Xpresso Black including screws
$25.99
The XPro & Xpresso cleats have been developed for the TIME XPro & Xpresso road bike pedal range. They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. You can also adjust the Q-factor (by switching the cleats) in order to optimize performance, following 3 points: security, ergonomics, and performance. The Bi-material brings more durability when walking with the cleats. These cleats are the stock cleats included with all XPro & Xpresso pedals.
$196.99
Get ready to fly high with the Krypto DH pedals. Built tough with its CNC'd aluminum body and self-lubricating bushings, this pedal makes a big statement on the trail with full laser graphics and premium finish. Ten strategically placed pins keep you in maximum control.
- Body: CNC-machined 6061 Aluminum
- Axle: CNC-machined Cro-Mo
- Bearings: Ultralight, self-lubricating sealed bushings
- Replaceable pins
- Size: 117mm x 110mm
- Weight: 208g (each)
$196.99
Time to take your eBike to the next level. With a pin layout derived from our downhill pedals for maximum grip, the ePedal is specifically designed for eBikes with its narrow profile for optimum cornering clearance. Compact cartridge bushings paired with a sealed bearing system keep things running smoothly for miles and miles. Topping it off is an electric design with full-coverage laser etching on a premium finish.
- Body: CNC-machined 6061 Aluminum
- Axle: CNC-machined Cro-Mo
- Bearings: Ultralight compact bushings + sealed bearings
- Replaceable pins
- Size: 102mm x 108mm
- Weight: 170g (each)
$149.99
The new OOZY Reboot Pedal - 100% the same award-winning OOZY Pedal platform that SPANK Industries has been manufacturing for years, but now with crank boot compatible axle and fresh new full colour anodized finishes for 2021.
- Super slim 12mm for maximized pedal clearance
- CNC weight-optimized trail pedal at 360g per set
- Forged alloy body is shot-peened and anodized for increased durability
- Equipped with hollow taper Chromoly steel axles for unmatched strength
- Sealed bearings and IGUS bushings
- 18 preassembled pins in virtual concavity for ultimate grip
- Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike
- Crank boots compatible axle
$54.99
Pedal Axle Rebuild Kit for SPIKE & OOZY Trail Pedals
- 1 set L&R axle
- 2pcs IGUS bushing
- 2pcs O-ring
- 2pcs dust cap
- 2pcs stainless shim washer
- 2pcs silicone friction seal
- 2pcs lock nut
$11.99
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action.
- 2pcs IGUS self lubricating bushing
- 2pcs O-ring
- 2pcs stainless shim washer
$8.99
Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals.
- Provide durability and improved safety
- Mix and match with the longer stock pins to customize your ideal amount of grip
$89.99
- Large platform 100mmx105mm size with concave profile combines support with ultimate grip
- Strong and lightweight one piece alloy body
- Forged chromoly axle delivers strength and durability
- Shot-peen surface increases fatigue life and impact resistance
$137.49
- Crank Boot Compatible Axles
- Full Anodized Finish
- 12mm Thin—Massive 11x11cm Platform
- Cold Forged Alloy Pedal Body
- Hollow Taper Scandium Enriched Steel Axle
- Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces
- Chamfered Side Edges for Improved Cornering Clearance
- Oversized Sealed Full Compliment Inboard Industrial Bearing
- Sealed Outboard IGUS Bushing
- 18 Adjustable Pins per Pedal
- CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence
- Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$49.99
- Crank boots compatible axle rebuild kits for SPIKE and OOZY pedals (with bright green friction seals), produced in 2015 or later. Bearings must be purchased separately.
- Crank boots compatible axle
- Sealed Bearing x2pcs
- 10mm IGUS Bushing x2pcs
- Green Friction Seal x2pcs
- Locknut
- O-ring x 2pcs
$11.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness.
- 28pcs rear load pins
- 16pcs front load pins
- Tool included
$112.49
- Full Anodized finish
- 16-12mm concave platform
- 100mm x 105mm platform
- CNC Alloy Pedal Body
- Hollow Taper Scandium Enriched Steel Axle
- Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces
- Oversized Sealed Full Compliment Inboard Industrial Bearing
- Sealed Outboard IGUS Bushing
- CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence
- Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$112.49
- Full Anodized finish
- 16-12mm concave platform
- 110mm x 105mm platform
- CNC Alloy Pedal Body
- Hollow Taper Scandium Enriched Steel Axle
- Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces
- Oversized Sealed Full Compliment Inboard Industrial Bearing
- Sealed Outboard IGUS Bushing
- CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence
- Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin
$112.49
- Dial your fit with Spoon flat pedals available to fit from kid's sizes
- 90mm = US shoe sizes 6 & under / 100mm = US shoe sizes 7~10 / 110mm = US shoe sizes 11+
- Forged chromoly axle which delivers strength and durability
- 16mm-12mm concave profile with 20 preassembled steel pins for added grip
- Shot-peened and anodized to enhance fatigue life
- Recommended for: ASTM 5, All mountain, Trail, Enduro, free ride, DH, E-Bike, KIDS (90x105)
- PLATFORM SIZE (mm): 90x105
- PLATFORM PROFILE (mm): 16—12 concave profile
- WEIGHT +/- (g): 360 / 400 / 420 per set
- AXLE: cold forged chromoly steel
- BEARING/BUSHING: industrial sealed bearing, IGUS bushing
- PINS: 20 steel pins (per pedal)
- TECHNOLOGIES: Chamfered leading edges
- MATERIAL: MGR extruded alloy body, CNC optimized
$89.99
- Large platform size with concave profile combines support with ultimate grip
- Strong and lightweight one piece alloy body in eight color options
- Forged chromoly axle delivers strength and durability
- Shot-peen surface increases fatigue life and impact resistance
- Material: Alloy
- Platform Size (mm): 100 x 105
- Platform Profile: (mm) 16mm
- Weight (g): ±395/set
- Axle: Cold-forged Chromoly steel
- Bearing/Bushing: Industrial bearing, IGUS bushing
- Pins: 12 steel & 8 alloy pins per pedal - Virtual Concavity
- Finish: Mottled / grunge anodized
$49.99
The Spoon Pedal Axle Rebuild kit includes the internal parts required to completely rebuild a set of Spoon pedals.
- Pins available separately
$89.99
- 100% SDG DNA in the design of these pedals
- Utilizes a flat profile which allows optimal grip for flat pedal shoes
- Composite body design
- Minimal 17mm pedal body height maximizes the pedal feel
- 105mm x 110mm Platform
- Ramped and undercut traction pad
- 18 pins, replaceable, bottom loaded
- Bearing/bushing design for maximum durability. Fully rebuildable pedal design
- Cro-Mo axle