The partner in crime to WeThePeople's Supreme Rear Cassette Hub, the matching Supreme Front Hub uses high-quality Japanese sealed bearings and a beefy, heat-treated 4130 chromoly axle held on with 10mm female bolts. Match it up with WTP nylon fiberglass Supreme front hub guards and you have a dialed front-end setup. - 14mm hollow/hardened heat treated chromoly axle - 10mm female bolts
$145.99 - $270.99
SPANK's new OOZY Trail Hubs are a huge step forward in straight pull hub design and manufacturing. The OOZY Trail Hub has unique oversized straight pull flanges, and a 32H configuration, which vastly improve contact and support between spokes in a 3 cross lacing, offering added spoke strength, wheelset stiffness, and spoke torque retention never before seen in straight pull designs. The SSL (single spoke length) flanges offer ultimate ease and convenience of maintenance. SPANK's end cap system is compatible with SPIKE hubs, and makes conversion between 135 and 142mm rear spacing simple — in QR, 10mm, or 12mm axle diameters. 30T engagement and tried and true 3 pawl system deliver a good blend of quick pick up and trustworthy durability. Like the benefits and techie look of straight pull hubs but not the 28H drawback of traditional designs? Then OOZY Trail Hubs are the answer.
SPANK Industries' newest SPIKE Hubs are a step forward in the world of dependable, light weight, high performance hub design. Traditional 32 hole J-Hook type, oversized flanges, offer the utmost in wheel build strength and spoke torque retention, while maintaining a respectable overall weight. With a 3 pawl, 30T ratchet specification and oversized bearings, you get sharp engagement without compromise to durability or performance over time. Available in a range from 135mm to 157mm with configurations in between. Tested and recommended by some of the top racers, SPANK SPIKE Hubs offer the best of both worlds — World Cup performance and great value.
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes 3.30HD wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
$84.99 - $149.99
Shimano's Ultegra Hubs are flag-bearers for high-durability, smooth-rolling performance. Hardened steel cup-and-cone design use stainless steel bearings for minimal drag and superior ease of maintenance. Shimano's Digital Adjustment System makes hub maintenance fast, simple, and reduces axial force on the bearings, reducing wear and tear on the hub internals.
$142.99 - $149.99
An evolution of their world-renowned Supreme hubs, the WeThePeople Arrow hubs are a super lightweight alternative for the pegless riders out there looking for unrivaled performance and quality. The 7075-T6 alloy axle and knurled CNC machined cones help keep this hub incredibly light, and give it a super smooth look unlike any other front hub on the market.
An evolution of their world-renowned Supreme hubs - the Arrow Rear Hub from WeThePeople is a super lightweight alternative for the pegless riders out there looking for unrivaled performance and quality. Using the same bombproof Q-Lite internals and "IGUS" bushing driver as the Supreme Cassette, the Arrow's 7075-T6 alloy axle, and knurled CNC-machined cones help keep this hub incredibly light and give it a super smooth look unlike any other hub on the market.
$229.99 - $239.99
The Helix hub will take you backwards in style and holds up to any peg abuse that comes its way. Pair it up with WTP's plastic hub guards for extra protection (sold separately). - 6061-T6 alloy refined hub-shell - 14mm hollow bore / hardened heat-treated chromoly axle - Two-high quality sealed bearings - Twin sealed bearing and bushing system - One-piece driver design - Unique internal arrangement with face-bearing clutch stopper
$279.99 - $289.99
The features on this latest incarnation of WeThePeople's Supreme Cassette Hub include a peg friendly 12mm female bolt system, twin bearings in the non-drive side, and a new IGUS bushing Switch Drive Q-lite driver. The 12mm female bolt system gives you a stronger peg interface and a bombproof axle. Pair it up with WTP's Supreme hub guards (sold separately) and you have a super-dependable cassette hub ready for battle. - Material: 6061-T6 alloy refined hub-shell - Axle: 17mm 4130 crmo female axle, fully heat-treated - Bolts: super tough 12mm crmo bolt with 14mm extension - Bearings: 3 high quality sealed bearings in hub shell - Switch drive system, RSD/LSD switchable, new one piece pawl & spring system
- Super durable, all-purpose thru-axle disc front and rear hubs - CNC 6061 aluminum body with 7075 aluminum axle - 2 sealed cartridge bearings in front, 3 in the rear plus a radial needle bearing - International Standard 6-bolt disc rotor mount - Axle/spacing: 12 x 150mm through-axle - Weight: 325 grams
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
$24.99 - $29.99
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
Stan's 3.30/3.30Ti 9mm Hub Kit makes Stan's 3.30 front hubs compatible with a standard quick-release. Installation is easy—just pull the old ones off and put the new ones on.
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
Replacement end caps for Stan's NoTubes ZTR/3.30/3.30 Ti rear hub. They're compatible with a Type 2 hub.
Stan's 3.30HD 15mm Hub Kit makes Stan's 3.30HD front hubs 15mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's 3.30HD 20mm Hub Kit makes Stan's 3.30HD front hubs 20mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Stan's 3.30HD QR Hub Kit makes Stan's 3.30HD front hubs quick-release compatible. Installation is easy—just pull the old ones off and put the new ones on.
Replacement Shimano/SRAM aluminum freehub body for Stan's NoTubes 3.30HD rear hubs.
Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30HD rear hubs.
Replacement freehub body for Stan's NoTubes 3.30R and 3.30RTi rear hubs.
Converts a Stan's 3.30RD/3.30RDTi hub to a 12x142mm thru-axle.
Smooth-rolling performance and 11-speed compatibility define Shimano's 105 rear hub. Shimano's trademark angular contact bearings ensure that your wheels roll as smooth as silk. This hub includes a Shimano quick-release.
Shimano's 105 Front Hub is an excellent beginning to a strong, light front wheel. The diamond-polished bearing races mean the hub rolls super smooth and the labyrinth seals shut out dust, dirt and water. Plus, the cold-forged-aluminum hub shell is beautiful and built to last. You get Shimano's excellent quick-release skewer, too.
Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface
Shimano XT FH-M756 Series Rear Hub - Double contact bearing seals - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-Bolt rotor mount - Bearing Type: Loose Ball - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Center to Flange, Left: 33.5 - Center to Flange, Right: 20.5 - Flange Diameter Left: 61 - Flange Diameter Right: 61 - Hub Drilling: 32 - Hub/Brake Compatibility: 6-Bolt Disc - Rear Axle: QR x 135mm - Skewer Included: Yes - Spoke Interface: J-Bend - Weight: 495 grams
For optimum wheel strength and reliability, Shimano's Dura-Ace Rear Freehub is made of cold-forged aluminum with an oversize shell, sturdy flanges, a titanium freewheel body and a 15mm internal axle. Inside, diamond-polished bearing races and stainless-steel ball bearings minimize rolling resistance, while high-tech seals keep out water and dirt for maximum durability. This hub also features tool-free bearing adjustment for easy maintenance, plus a light and strong aluminum/steel quick-release skewer.
Page 1 of 3 Next page