Roof-Mount

Transport your bicycle quickly and safely with this lockable fork mounted carrier. Not compatible with Thule Aeroblade bars. - Easy-to-use stainless-steel skewer with oversized lever makes for secure loading and unloading - High-strength nylon composite head - Ratcheting wheel strap quickly secures back wheel to tray - Versatile design compatible with standard 9mm axles and most disc brakes. - Carries bikes with wheelbases up to 48" and tire widths up to 2.6". Even works with high profile rims - Carries 1 bike - 1 One-Key lock cylinder (sold separately) locks the bike to carrier and carrier to rack - Fits Thule rack systems or other round bars - Factory rack compatible with Thule Ride-On Adapter (sold separately)

Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 118cm / 47 in

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. Features - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide to find out which roof rack fits your car Technical specifications - Loading width: 50-inch - Length: 50-inch - Maximum load: 220-pound. Please also check the maximum roof load capacity of your vehicle. - Equipped with T-track

Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 108cm / 43 in

Premium aerodynamic load bar for an exceptionally quiet ride and easy installation of accessories. 1-pack. - Aerodynamic and quiet - Sliding functionality for easy loading - Easy to install and use Features: - Load bar for Thule Edge roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - Designed and developed for swift click-in assembly with Thule Edge load carrier feet, providing an integrated, low-profile roof rack and a custom look - Smooth installation and removal of accessories thanks to upper T-track with QuickAccess interface - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length Specifications: - Loading width: 36-40 in - Length (in): 41 - Maximum load: lb/75 kg. Please also check the maximum roof load capacity of your vehicle. - Equipped with T-track

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 135cm / 53 in

Classic steel square bars with black polymer coating. 2-pack. - Standard steel load bar available in a variety of lengths - Plastic coating provides additional grip for rooftop cargo - Check the Thule Buyer's Guide to find out which roof rack fits your car - 118cm / 47 in

Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), plus the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your 4-wheeler, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.

The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.

Now the entire posse only needs to mount up on one vehicle. The BigStack lets you carry up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. Folds down for better aerodynamics when not in use. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds down when not in use for better aerodynamics and easier access to your garage - Universal built-in hardware fits round, square, factory and aerodynamic crossbars right out of the box. Optimized for aerodynamic bars. - Top-of-the-line hull guard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - AnchorHead tie down feature makes it easy to manage straps with multiple kayaks - Heavy-Duty Straps and Bow and Stern Tie-Downs included (HoodAnchor, sold separately, is required for vehicles with no attachment points for Bow and Stern Tie-Downs) - Premium heavy-duty straps with coated metal buckles protect boat and vehicle - Great for carrying multiple whitewater boats - Lockable with SKS Lock Cores (sold separately) - Minimum crossbar spreads of 24" or more Product Specs: - Weight: 7.20 lbs. - Dimensions: L 6.00 in x W 5.00 in x H 22.00 in - Minimum Crossbar Spread 24.00in - Limited Lifetime Warranty

Easy-to-install foot for Thule Evo roof racks, for vehicles with raised railings. - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Rubber lining protects the surface of the raised railings and ensures a perfect fit - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 150cm / 60 in

A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach adjustments and included tool

Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.

Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.

Thule's Circuit Fork Mount combines aerodynamics, durability, and style. The "D" shaped aluminum tray decreases drag and wind noise, and is corrosion resistant to stand up to the elements. Thule's Lockable SecureSkewer makes it easy to quickly load/unload your bike, and secure it with Thule's One-Key lock cylinder (sold separately). Thanks to the integrated wheel cradle with ratcheting strap, it handles tires up to 2.6-inches wide as well as high-profile rims with ease.

Don't let the sleek lines fool you. SkyLine FX is a cutting-edge roof rack with integrated crossbars and towers that has no bar overhang and is designed to support whatever you're carrying. It gives your vehicle a clean, modern aesthetic with a seamless attachment to all of our vehicle-specific Landing Pads. PRODUCT DETAILS - Integrated tower and crossbars, for a clean visual connection to the vehicle, with no crossbar overhang - Secure, easy-to-use tower specifically designed for Vehicles with Fixed Points or Tracks - Includes aerodynamic, T-slot JetStream Black crossbars - SmartFill push-down infill for easy t-slot mount attachment - Sleek tower cover styling with matte finish, tone-on-tone black logo - Easily locks to you vehicle with our SKS system (sold separately) - Multiple bar lengths available for precision sizing on various vehicle roof widths - Uses Yakima's proven Landing Pads for attachment to vehicles with fixed points or tracks - BarBed has 12° of pitch adjustment to optimize tower position and level bars PRODUCT SPECS - Weight: 5.00 lbs. - Dimensions: L 33.50 in x W 5.00 in x H 3.50 in

- Keep your greasy, dirty Hi-Lift Jack up and out of the way

Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.

Ski/snowboard racks need to do one thing well: hold your stuff safely and securely. Ours does a lot more, and awesomely. Easy to install on any roof rails, handy slide-out feature to load and unload without climbing on your vehicle, and a look that says you don't cut corners (but you do like to carve on the slopes). - Metal outer shell and premium gloss metallic powdercoat provide unmatched strength and finish - GripLock rubber securely holds skis or snowboards of varying sizes - FLIP MOUNT SYSTEM allows for quick install or removal - Large intuitive handle - Both GRIP and FLIP Mount System are fully locking - Slide-out design makes for easy loading and unloading

Now racking up ladders, lumber and other lengthy gear supplies is a lot easier. Yakima’s new Ladder Roller attaches to our Truck Collection HD Bars and most any T-slot crossbar. - Steel brackets with durable black powder-coat finish for many years of use - Wide 24" (615mm) roller footprint for easy loading of a wide range of gear and equipment - Includes hardware for both our HD Bar and most T-slot crossbars - 75-lb. load capacity - Weight: 2.50 lbs - Dimensions: L 25.75in x W 4.75in x H 2.00in - Some assembly required, 5 minute install

The Yakima FlushBar has a signature look that seamlessly integrates with the shape of your modern vehicle. This crossbar with integrated towers has no bar overhang, so your vehicle will look like it came from the factory with FlushBars already installed. The FlushBar shape maximizes strength, while minimizing drag and reducing noise levels to nearly zero. It accepts almost all Yakima mounts and cargo boxes for adaptable, multi-sport versatility. A complete system consists of two FlushBars and a Yakima Fitting Kit. Please consult www.yakima.com to determine which Yakima Fitting Kit and which FlushBar sizes are required for your specific vehicle. Product Details: - Tower is integrated with the crossbar for a sleek, seamless appearance - WindRidge on the leading edge of the crossbar reduces noise and decreases drag - JetTruss internal support engineering adds serious strength for minimal weight - Patented SmartFill technology allows for easy install of T-slot style mounts, such as the Yakima HighSpeed with SmarT-Slot Kit 1 - Compatible with almost all Yakima mounts and cargo boxes. Consult Yakima's Fit My Vehicle Guide for a detailed list. - Anchors to your rooftop with vehicle specific Yakima fitting kits (sold separately). Consult Yakima's Fit My Vehicle Guide to determine which Yakima Fitting Kit is required for your vehicle. - Easily locks to your vehicle with Yakima's SKS system (sold separately)

Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.

Simple, sturdy, and reliable – the JayHook is a fresh take on a Yakima classic. Designed to carry all types of kayaks, these side-loading J cradles are tough enough for years of use, secure enough for winding river roads, and padded enough to coddle your kayak. The tool-free universal attachment works with most roof racks. Bow/Stern Tie downs and Heavy Duty Straps are included, so you get everything you need to carry your boat. - Carries any type of kayak while taking minimal space on your roof rack - J-shaped cradle is secure, stable, and easy to load - Durable padded contact points provide protection and grip while traveling - Universal mounting hardware fits most roof racks - Easy tool-free installation lets you quickly mount, load and go - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs

Add another room to your SkyRise rooftop tent with the SkyRise Annex. Perfectly sized to be a changing room, storage area, or shelter from a storm, the Annex slides easily into the SideTrack on the outside edge of the SkyRise floor. The waterproof, PU coated 210D ripstop nylon material keeps you dry in the rain and the two zippered mesh windows keep you cool in the summer heat. Attachment points galore means all of your other SkyRise accessories will still work with the Annex, and integrated exterior hooks and ground stakes will ensure the wind doesn't ruin your shady afternoon snooze. Product Details: - Annex that hangs below your Small SkyRise rooftop tent to provide additional living space at your base camp - Slides into the SideTrack on the outside edge of the SkyRise and hangs down below the tent floor to create a changing room or storage area - Integrated interior and exterior attachment points ensure all your other SkyRise accessories will work along with the Annex - Waterproof PU coated 210D ripstop nylon construction keeps you and your added living space dry - Full height zippered front door makes for easy entry and exit - 2 zippered mesh windows add ventilation and a view of camp - Included stakes anchor the annex in case of high winds - Storage duffel bag makes tearing down camp a breeze Product Specs: - Weight: 5.75 lbs - Dimensions: L 48.00" x W 56.00" x H 96.00"

Build-out your vehicle to be a true adventure rig-whether to get to the local trailhead or miles from civilization. Designed and thoroughly tested in the rugged Australian Outback, the LockNLoad roof rack platform is a blank slate, ready for you to customize to your needs. Integrated T-slots throughout allow quick and easy attachment of our new LockNLoad accessories. Horizontal slats are designed to attach bike, kayak, surf, ski mounts, or even one of our SkyRise rooftop tents. The LockNLoad easily attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately) or directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapter sold separately) to eliminate the need for crossbars on your vehicle. Available in 6 sizes, there's a platform sized for your vehicle that's Off-Road Rated and ready to explore. Product Details: - Attaches to your vehicle in one of two ways. Directly to an existing roof racks crossbars using LockNLoad Crossbar Clamps (sold separately), or directly to a TimberLine or SkyLine roof rack towers with the LockNLoad SL Adapter (sold separately. - Designed and thoroughly tested in the rugged Australian Outback. - Yakima Off-Road Rated to 165–330 lbs. (depending on vehicle fit and roof type). - Side-to-side slats act like crossbars for easily mounting most bike, kayak, ski mounts and more. - Integrated T-slots in every slat and outer frame, for simple and secure attachment of T-slot and LockNLoad accessories. - Engineered aluminum construction features a textured black powder-coat finish for durability and style. - Six platform sizes ensure a perfect fit on your vehicle for a customized look. - Attaches to nearly any roof rack with LockNLoad Crossbar Clamps (sold separately). This size platform requires 2 sets of LockNLoad Crossbar Clamps. - Mounts directly to Yakima SkyLine and TimberLine towers with the LockNLoad SL Adapter (towers and adapters sold separately). - This size requires 2 sets of LockNLoad SL Adapter and 4 towers. - Full collection of new LockNLoad accessories available to complement any adventure. Product Specs: - Weight: 84.57 lbs - Dimensions: L 84.00in x W 62.00in x H 4.00in - Some assembly required, 60 minute install

Sun's out, power's on. The CBX Solar blends clean-lined, modern aesthetics with a first-of-its-kind integrated solar panel. We teamed up with Sunflare to create a solar panel capable of delivering a 36W/5-volt output for when you're adventuring off the grid. With 2 USB ports, it provides enough juice for a small campsite, won't drain power from your vehicle, and can charge phones, tablets, camping lanterns, and action cameras. An integrated, easy-grab lid handle locks gear inside, and the removable torque tool stows away to free up all available space for your gear. Product Details - Integrated solar panel is heavy-duty to withstand the elements - Interior converter features two USB ports for charging devices - Produces 36 Watts/5-volts, Perfect for charging things like portable batteries, cell phones, and camping lanterns - 16 cubic feet of cargo space - Rugged angular finish and stealth-like texture stands out from the crowd - Removable torque-limiting knob ensures a safe and secure installation - Intuitive and easy to grab lid handle locks gear inside the box and the box to the vehicle - Market-leading internal usable space with an unobstructed flattened floor provides more space for your gear - Optimized hatch clearance for better vehicle fit - Internal lid stiffeners for durability and easy open and close - Dual-sided opening for easy access on either side of your vehicle - Hauls gear for up to 3 campers; fits snowboards and skis up to 185cm - Integrated interior tie-down points - SKS Locks included for added security - Black chrome badging - Made in the USA Product Specs - Weight: 60.00 lbs. - Dimensions: L 83.00 in x W 38.00 in x H 14.00 in - Minimum Crossbar Spread 24.00in - Maximum Crossbar Spread 35.50in - Limited Lifetime Warranty

The FatCat EVO is our sleekest, quietest, and sweetest ski & snowboard mount. It is wide enough to carry six pairs of powder skis—up to 136mm at the tip—or four snowboards. FatCat EVO mounts tool-free on virtually any roof rack. The OverHang clamp attachment point makes it easier to reach your skis or boards. SKS locks are built in for added security, and the mirror black finish looks awesome on your roof. For T-Slot crossbars, add the SmarT-Slot Kit 2 for a super-sleek setup (sold separately). - Easily carries six pair of skis—up to 136 mm wide at the tip—or four snowboards - Aerodynamic design delivers a quiet ride and streamlined good looks - Universal mounting system works with round, square, factory, and most aerodynamic roof racks - Integrated SkiLift provides clearance for tall bindings - DoubleJoint hinge expands for easy use with thick skis and boards - For easier access to skis and snowboards, the OverHang clamp-mounting position shifts the mount further out on your vehicle's roof rack - Large button makes it easy to open with gloves or mittens on - Sleek mirror-black finish looks great on your roof - Integrated SKS (Same Key System) locks included - Compatible with T-slot crossbars—just add our SmarT-Slot Kit 2 (sold separately) Product Specs: - Weight: 12.75 lbs. - Dimensions: L 40.50 in x W 3.75 in x H 5.25 in - Minimum Crossbar Spread 12.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty