Accessories

Eload Hydration Formula is a sports drink formulated to help endurance athletes maintain a proper electrolyte balance by replacing fluid and electrolytes lost through sweat. This product is: - Free from artificial colors, flavors, or preservatives - Free from resistant starch - Low sweetness and low acidity - Quickly absorbed - Vegan - Nut-free - Gluten-free - Kosher/Parve

- Made of highly resistant polypropylene - Rear: Mount fits seat posts Ø 25 – 32 mm; 47 to 60 mm blade width; Reflective strip; 125g - Front: Downtube installation w|elastomeric straps; 60 to 80 mm blade width; 62g - Wheel-Tire Size Compatibility: 24''-26"

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors

Clean your chain in under 20-seconds with White Lightning's The Trigger. Simply close the lid of The Trigger over your chain, spray, and backpedal your chain for about three revolutions. The Trigger comes with one 12-ounce can of Clean Streak so you'll have everything you need for a clean, quiet ride.

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

- Hex wrenches 1.5, 2, 2.5, 3, 4, 5, 6

Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.

Carry just the necessities in Topeak's Medium Aero Wedge Pack. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.

Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.

Carry all the necessities in Topeak's Aero Wedge Pack DX. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and it sports separate compartments for your mini tool and tube, and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.

Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

You've got all these cool apps on your Samsung Galaxy for distance, GPS navigation and music—bring it with you on your ride with Topeak's RideCase. This carbon fiber and plastic case fits the Galaxy S4 and comes with both a stem top-cap and handlebar mounts. You can adjust the viewing angle for either portrait or landscape viewing and the weather-resistant shield still allows touch screen functionality.

Sporting a fit made for those who take full advantage of life, Swick is vying to be part of your adventure. Call it sweet. Call it sick. It’s Swick.

Sporting a fit made for those who take full advantage of life, Swick is vying to be part of your adventure. Call it sweet. Call it sick. It’s Swick. - Frame: Light & Durable Grilamid TR-90 - Lens: Smoke – Shatterproof polycarbonate lenses with 100% UVA / UVB protection from UV Rays - Features: Integrated hinge never pulls hair, hydrophilic nose pads for increased gripping, and Tifosi Glide technology allows the frame to slide on comfortably and provide a no-slip fit - Fit: Medium-XL | Weight: 26G - Included: Microfiber Cleaning Bag

Mount virtually any smartphone to the Thule Handlebar Mount for easy access to GPS data and other apps. - Conforming side grips securely keep device in place while allowing full access to ports and controls - Rotates 360° for portrait or landscape viewing - Rubberized platform prevents slipping - Compatible with virtually any smartphone, with or without case, up to 90mm/3.5 in. wide.

Use these axle nuts to put a city or track bike in a Tacx trainer. The available axle nuts are M10x1 (T1415) and 3/8 Shimano Nexus (T1416). For use with Tacx classic trainers only

The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

Chain rivet extractor for 10, 11 speed chains. Chain pin guide with 1 spare pin.

- Everything you need to clean your chain and drivetrain - TB-32900 includes chain cleaner, eco-friendly degreaser, chain lube and folding brush

Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill

Our Sport Hydration Drink Mix was created for a simple purpose—to replace the electrolytes lost in sweat and to provide a little bit of energy when working out, without offending your palate or gut. We initially created this drink because some of the world's best athletes needed better. Conventional sports drinks made them sick. They were undrinkable—too sweet, over-flavored, and didn't even replace what was lost in sweat—which defeated the whole purpose, like fighting thirst with more thirst. The best athletes needed something to safely hydrate, something to quench their thirst, and something to help them perform better. So with their help, we reimagined sports drinks, stripping down what used to be a neon-colored carnival to its bare essentials. In the process, we learned that simple wasn't just better for elite athletes, it was better for everyone who works hard and sweats. The result is a sports drink with minimal sugar (4g per 100 ml) and a ratio of sugar (glucose + fructose) that is optimized for faster absorption, an electrolyte profile that actually matches what is lost in sweat (800 mg sodium, 80 mg potassium, 100 mg calcium, and 80 mg of magnesium per liter), and only real fruit for flavor for a light and refreshing taste that you can drink all day. That's it—less sugar, the right electrolyte profile, and real fruit. So, if you've never met a sports drink you wanted to take home, your luck is about to change. Drink when thirsty and leaking like a busted fire hydrant. Don't drink while deep in the middle of a Netflix marathon session or sending emails (unless, you're also on your trainer). Meaning, if you haven't earned it, you don't deserve it.

Keep your favorite lights running with Serfas' Bat-1 Replacement battery. Thanks to its 3300mAh capacity, you'll have plenty of power for all your night activities.

The unique design of Serfas’ Switch-Hitter Nylon Cage makes it adjustable for center, right or left side bottle retrieval. On any bike frame where bottle clearance is an issue, this lightweight nylon cage shines.

Serfas' TL-200 LED is an amazing taillight. It's super bright thanks to its twin-beam 1-watt LEDs that will keep you riding safe no matter how dark it gets. It features steady, flashing and rolling modes with up to 80 hours of run time from the two included AAA batteries.

Serfas' Thunderbolt Headlight delivers 90 lumens in an extremely versatile, USB-rechargeable package. Attach the water-resistant silicone body nearly anywhere on your bike, and use the high, low, or two flash modes to make sure cars, cyclists and pedestrians can see you at night. At just 50 grams, you won't even notice it's on your bike — but others will!

Replacement battery for 2019 True Series MTB & Road headlights. Plastic storage case included.

Coming up with new ways to make you safer on the road is a top priority at Serfas. Their unique “BLAST” Audible Warning System emits a loud 85 Decibel signal when your light battery gets under 10 minute runtime in that specific mode so you'll know when you need to recharge to be seen. How It Works: - When the battery reaches 10 minutes of runtime, in its current mode, the light will emit a long beep followed immediately by a short beep. Sound will continue every minute. - When the power button is pressed it will put the light in the next longest running mode & it will restart the battery low alert until 10 minutes of runtime in the mode is reached. Repeat as necessary. Example: Going from highest mode to lowest mode at first beep could extend runtime up to 5 times.* - Light will emit beep sound repeatedly when last minute of runtime in the current mode is reached. - While charging the light the power button will blink blue. When full charge is achieved light will beep to notify charging cycle is complete. - Light emits a beep when power button is pushed & light goes from mode to mode. Features: - “Blast” Audible Warning System Alerts Rider Of Low Battery - Design Easily Fits Aero Applications - Low Flash Lasts Up To 14.5 hours - Extra Long Mounting Straps For Endless Mounting Options Specs: - Solids Modes: High (100 Lumens): 2 hrs & Low (20 Lumens): 7.75 hrs - Flash Modes: High (100 Lumens): 3.5 hrs & Low (20 Lumens): 14.5 hrs - Weight: 48 Grams Without Bracket - Battery: USB Rechargeable Li-Polymer

An evolution of one of our classic performance styles, the adjustability of the new Caliber allows you to customize the fit to your preferences. The wide temple arms provide extra protection, and the lens geometry is optimized for full coverage and a great field of vision.

Designed specifically for women, the Catja is a cat-eyed shield with a front-mounted lens that's designed to bridge the gap between fashion-forward casual glasses and performance eyewear. It is also likely to be our most mispronounced model.

Yeah, yeah, Ryders needs a small-fitting rimless style. Well, here it is! Grafton is ideal for small or narrow faces and has all of the elements that you love about Ryders and rimless. Impact resistant and optically correct, these lenses provide 100% protection from UVA, UVB and UVC rays as well as harmful, high energy light to 400nm. As if that’s not enough, they also have premium hydrophobic and scratch-resistant coatings. This is the standard from which we build all of our more technical lenses, so every Ryders lens has the same technology at its core and the highest standard of quality. Lens Technology - UV400 - Hydrophobic - Impact Resistant - Optically Correct - Scratch-Resistant Coating Frame Technology - Grilamid TR90 - Hydrophilic Nose Pads + Temple Tips - Ultra Durable/Flexible Frames Specs and Measurements - Fit: Small - Base Curve: 7C

Look the Hiline in the face and it seems to be all about style. Flip it around and you’ll reveal its hidden features. Strategically placed air diffusers, interchangeable nose pads for a custom fit, and co-injected temple tips make this a true sport glass despite its fashionable facade.

The Nimby features a lightweight, rimless design with a shield lens for an unobstructed field of vision. Designed to meet the demands of cyclists, the angle of the lenses and the resulting airflow can be customized by adjusting the nose pads. PREMIUM COATINGS AND FINELY TUNED TINTS ARE JUST OUR STARTING POINT. Impact resistant and optically correct, these lenses provide 100% protection from UVA, UVB, and UVC rays as well as harmful, high-energy light to 400nm. As if that's not enough, they also have premium hydrophobic and scratch-resistant coatings. This is the standard from which we build all of our more technical lenses, so every Ryders lens has the same technology at its core and the highest standard of quality. LENS TECHNOLOGY - UV400 - Hydrophobic - Impact Resistant - Optically Correct - Scratch-Resistant Coating FRAME TECHNOLOGY - Adjustable Nose Pads - Grilamid TR90 - Hydrophilic Nose Pads + Temple Tips SPECS & MEASUREMENTS - Fit: Large - Weight: 26g - Base Curve: 7C

An updated version to the RYDERS popular Nimby. Now with a nose pad fit kit, adjustable temple tips, and a large lens offering maximum protection. The Nimby 2 can be used in all situations whether you are running, cycling, or taking to the streets. PREMIUM COATINGS AND FINELY TUNED TINTS ARE JUST OUR STARTING POINT. Impact resistant and optically correct, these lenses provide 100% protection from UVA, UVB, and UVC rays as well as harmful, high-energy light to 400nm. As if that’s not enough, they also have premium hydrophobic and scratch-resistant coatings. This is the standard from which we build all of our more technical lenses, so every Ryders lens has the same technology at its core and the highest standard of quality. LENS TECHNOLOGY - UV400 - Hydrophobic - Impact Resistant - Optically Correct - Scratch-Resistant Coating FRAME TECHNOLOGY - Adjustable Nose Pads - Grilamid TR90 - Hydrophilic Nose Pads + Temple Tips SPECS & MEASUREMENTS - Fit: Large - Weight: 29g - Base Curve: 6C

Driven by the needs of cyclists, the Pace’s lightweight, rimless design ensures that there’s no frame to obstruct your view while in your riding position. The adjustable hydrophilic nose pads and temple tips allow you to fine-tune the fit to optimize airflow, stability and comfort.

A minimalist version of the ever-popular Strider, the Saber offers the same lens coverage and the same hydrophilic, adjustable nose pads in a very lightweight design.

Profile Design's Aerodrink Base Bar Bracket is the perfect holder for your Profile Aerodrink bottle. It weighs next to nothing and is built tough to firmly hold bottles and last for years of training and racing. It attaches quickly and easily to all Profile, and most other base handlebars (base bars and bottles sold separately).

The Polar CS Cadence Sensor allows you to measure your real time and average cadence of your entire cycling session. This advanced wireless cadence sensor measures your pedaling rate as revolutions per minute so you can compare the effectiveness of your ride against previous rides. FEATURES Improves your cycling technique and identifies your optimal cadence Designed to be aerodynamic and light Light yet tough, and easy to attach Downloads cadence graph, heart rate, and speed to computer Includes magnet, rubber mount, and Polar tape for installation Compatible with CS100b, CS100, CS200, CS200cad, CS300( Not Compatible with Wind Series)

Speed sensor W.I.N.D. measures the current, average and maximum speed of your ride Interference free speed data lets you evaluate and analyze your individual performance more accurately For: Polar RS800CX, CS600X, CS500+, RCX5, RCX3 GPS

This GPS sensor sends speed and distance data to the mother unit while you’re mountain biking, trail running, skiing, walking, paddling, etc. It allows you to tailor your workouts to speed and distance targets in addition to heart rate zones. Flexible fabric armband Wireless transmission technology Operating temperature is -20°C to 60°C Distance accuracy of +/-2% Speed accuracy of +/- 2km/h Water-resistant to 20m Takes 1 AA battery (lithium or rechargeable NiMH battery recommended for temperatures 5°C and below) Battery life averages 10 hours (20°C) Compatible with Polar® RS 300X and FT60

Polar's S-Series Cadence Sensor lets you view your pedaling rate displayed in revolutions per minute (RPM). This helps you ride efficiently and pace yourself. This accessory is compatible with Polar S510, S520, S625X, S710, S710i, S720i, S725 and S725X heart-rate monitors.

A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes: • 1 GSC-1 Gear Clean Brush • 1 Tapered Detail Brush • 1 Frame Cleaning Sponge/Bristle Brush • 1 Soft Bristle Soaping Brush

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

Made for the rigors of everyday shop use, this adjustable tap handle fits many common bicycle taps. • Fits most metric taps from M4-M12 • Fits most standard taps from #8-9/16”

- Incredible water dispersing action to protect, preserve and freshen your bike - Perfect all-over after wash corrosion inhibitor - Drives out moisture and leaves a sparkling non-sticky protective layer on your frame, drivetrain, metal parts and paintworks. - Ideal before applying chain lube - Contains P.T.F.E. - P.T.F.E. to prevent dirt adhesion between washes and reduces future maintenance time as well as helping reduce friction - Do not apply on tire and braking surfaces - HazMat item not eligible for air shipment

- Bio Formula easily cuts through tough grease - Can be used on chains, gears, and individual components - Water-soluble formula for easy cleaning - Works on tough waterproof grease and chain lube residue - HazMat item not eligible for air shipment

- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection

- Improves braking performance - Treats pads and rotors to reduce brake squeal - Prolongs disc pad and rotor life - Rapidly removes brake dust, oil, grease, brake fluid and grime - Re-hydrating formula that's acetone free to preserve braking components - Safe to use on both bicycles and motorcycles

- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Safe for metal, plastic, rubber and seals

- Frees seized parts - Disperses moisture to prevent rust and corrosion - Provides light lubrication for moving parts - Reduces metal-to-metal contact - Prevents dirt adhesion - Cuts down on friction to improve component efficiency

- Safe on all matt finishes including vinyl wraps - Streak and gloss free - Quick to use - Creates a durable hard wax coating - Dry and non-sticky formula - Protects from water marks and staining - Solvent free and environmentally friendly

- Incredibly effective cleaning formula containing Nano Technology that also cares for your bike's delicate finishes - Contains no harmful acids, CFC's or solvents and is fully biodegradable - Cuts through dirt, oil and grime quickly and safely leaving your whole bike sparkling clean

- Fast action bike cleaner - Readily biodegradable ingredients - Reduced carbon footprint with 94% less packaging - 100% plastic free packaging, 100% water free, 100% environmentally friendly ingredients, including plant based raw materials - Supplied in a compostable sachet and printed with vegetable inks - FSC recycled card box - Re-fill your old bottle and help reduce plastic waste - Dissolves easily in any type of water. Cold, warm and hot. Hard or soft - Safe to use all over the bike - Alkaline based and free from alcohol, CFCs, (EDTA), solvents or acids - Vegan & vegetarian friendly - -01: 4 sachets, 30g each - -02: Power Bundle: 4 sachets, 1x aluminum bottle, 1x bike clener spray trigger, 1x Silicon base for aluminum bottle