Lighting

USB rechargeable, high-performance optical lens front light provides 250 lumens brightness with good value. Rubber strap provides bi-directional tool-free mounting and easy removal on aero / round handlebars or helmet. - Max lumeninous intensity: 250 Lumens - Lamp: 2 white high power LED’s - Battery: 3.7V 850mAh Lithium Ion (integrated) - Control/Burn Time (approximate): 2.5hr (High) / 4.7hr (Middle) / 9.5hr (Low) / 10hr (Blinking) - Charge Time (approximate): 2hr / Micro USB - Input: 5V 500mA - Lamp Housing: Injection molded polymer - Strap Mount: Fits integrated bar/stem combo, aero / round handlebars, & helmet - Waterproof: IPX 6 - Low battery indicator - Size: 6.5 x 4.7 x 2.5cm / 2.6” x 1.9” x 1” - Weight: 45g / 1.59oz

Apollo is a waterproof super bright LED light that is small and easy to mount. It comes in Headlight, Tail Light, USB Headlight, USB Tail Light and Combo pack. - Super Bright LED - 50 hrs runtime on steady - 150 hrs runtime on flash - Aluminum Body - Extremely adjustable release strap - Waterproof - 240 degree visibility

Serfas' Thunderbolt Headlight delivers 90 lumens in an extremely versatile, USB-rechargeable package. Attach the water-resistant silicone body nearly anywhere on your bike, and use the high, low, or two flash modes to make sure cars, cyclists and pedestrians can see you at night. At just 50 grams, you won't even notice it's on your bike — but others will!

Coming up with new ways to make you safer on the road is a top priority at Serfas. Their unique “BLAST” Audible Warning System emits a loud 85 Decibel signal when your light battery gets under 10 minute runtime in that specific mode so you'll know when you need to recharge to be seen. How It Works: - When the battery reaches 10 minutes of runtime, in its current mode, the light will emit a long beep followed immediately by a short beep. Sound will continue every minute. - When the power button is pressed it will put the light in the next longest running mode & it will restart the battery low alert until 10 minutes of runtime in the mode is reached. Repeat as necessary. Example: Going from highest mode to lowest mode at first beep could extend runtime up to 5 times.* - Light will emit beep sound repeatedly when last minute of runtime in the current mode is reached. - While charging the light the power button will blink blue. When full charge is achieved light will beep to notify charging cycle is complete. - Light emits a beep when power button is pushed & light goes from mode to mode. Features: - “Blast” Audible Warning System Alerts Rider Of Low Battery - Design Easily Fits Aero Applications - Low Flash Lasts Up To 14.5 hours - Extra Long Mounting Straps For Endless Mounting Options Specs: - Solids Modes: High (100 Lumens): 2 hrs & Low (20 Lumens): 7.75 hrs - Flash Modes: High (100 Lumens): 3.5 hrs & Low (20 Lumens): 14.5 hrs - Weight: 48 Grams Without Bracket - Battery: USB Rechargeable Li-Polymer

Coming up with ways to make you safer on the road, when using Serfas lights, is a top priority. The "BLAST" Audible Warning System emits a loud 85 Decibel signal when your light battery gets under 10-minute runtime in that specific mode. How It Works: - When the battery reaches 10 minutes of runtime, in its current mode, the light will emit a long beep followed immediately by a short beep. Sound will continue every minute. - When the power button is pressed it will put the light in the next longest running mode & it will restart the battery low alert until 10 minutes of runtime in the mode is reached. Repeat as necessary. Example: Going from highest mode to lowest mode at first beep could extend runtime up to 5 times. - Light will emit beep sound repeatedly when last minute of runtime in the current mode is reached. - While charging the light the power button will blink blue. When full charge is achieved light will beep to notify charging cycle is complete. - Light emits a beep when power button is pushed & light goes from mode to mode. Features: - "Blast" Audible Warning System Alerts Rider Of Low Battery - Lasts Up To 28 hrs on 60 Lumen Flash - Aero-Bracket Fits Almost Any Post Or Application On A Bike - 42 Micro LEDs Specs: - Solids Modes: High (200 Lumens): 1 hr, Medium (100 Lumens): 2.25 hrs & Low (60 Lumens): 3.5 hrs - Flash Modes: High Rapid (300 Lumens): 6.25 hrs, High Slow (300 Lumens): 12 hrs & Low (60 Lumens): 28.5 hrs - Weight: 55 Grams Without Bracket - Battery: USB Rechargeable Li-Polymer

Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.

Lil' Cobber produces an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, this bike light is brilliantly effective at attracting attention and helping keep you safe on the road. Packing 110 lumens this Lil' Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best commuter bike light around, look no further. - Light modes: Max, Mid, Flash, Eco Flash, Max(es), Mid(es), Flash(es), Eco Flash(es) come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension

Mid Cobber Twinpack Front and Rear lights produce an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, these bike lights are brilliantly effective at attracting attention and helping keep you safe on the road. Packing 320 lumens for the front and 170 lumens for the rear, the Mid Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best front and rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Rolling Flash, Side Flash, Disco Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Integrated USB plug: No charging cable required, plugs directly into USB ports & is designed to be exposed to the elements - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension - Dimensions: 62 x 33mm - Weight: 44g

- Maximum output to 20 lumens - ANSI certified lumens and runtime - IPX4 water resistant - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost, Strive, Lanza, Coveta, Liv Rev Comp and Luta series helmets

Giant's Numen Mini Lights are small, versatile, and bright. Both the headlight and taillight use super bright LEDs to make sure you're visible in low-light riding situations, and feature your choice of steady or flashing mode. The tool-free rubber mounting hardware is fast, easy to use, and fits nearly every handlebar and seatpost.

- Integrated d-fuse seatpost magnet mount - Magnets hold the light firmly in place

A universal mount that fits standard 22-35mm handlebars and aero-shaped handlebars. An easy on/off rubber strap mount allows quickly switching Recon lights from bike to bike. - Fits all Recon HL series lights* - Not compatible with Recon HL 200 and Recon HL 100

Securely mount the Recon lights under the stem while riding. -Fits with Recon HL series lights NOT compatible with: - Recon HL 350 - Recon HL 200 - Recon HL 100

POWER COUPLE Perfect for the serious road or mountain biker to use under any conditions, the Recon HL 1100 combines outstanding lumen capacity with industry-leading usage time and monitors ambient light to change output accordingly while the powerful TL 200 ensures your visibility at all times. HL 1100: - Smart Mode light sensor monitors ambient light to adjust light output accordingly - ANSI certified lumens and run time - Focused optics with side light design for over 270-degrees of visibility - Heat-dissipating CNC-machined aluminum casing - Power status indicator alerts remaining run-time before powering off - Includes adjustable GoPro mount TL 200: - Maximum output to 200 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Two-lens focused and dispersed optics with side light design for over 270-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets - Compatible with saddle rail mount, providing optimal angle for visibility

Maintain Visibility All the Time. As with all the lights in the Recon series, the new Recon TL200 has a compact design, an integrated power indicator, complies with the ANSI standard and is IPX7 certified. Additionally, the smart light sensor can auto adjust the light output, day or night, to ensure you can be seen all the time. - Maximum output to 200 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Two-lens focused and dispersed optics with side light design for over 270-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets - Compatible with saddle rail mount, providing optimal angle for visibility

A unique, innovative clamp system that clips securely and discreetly to your seat rails. Compatible with Recon TL 200 and Recon TL 100 only. Light not included

Recon+ tail lights feature an integrated rearview radar that pairs with ANT+ and Bluetooth capable devices to alert you to traffic approaching from behind and then emit a powerful flash for maximum visibility. The Recon+ tail light can also be switched to a lower intensity light to avoid blinding fellow riders on the group ride.

The Recon TL Rack mount securely attaches your Recon tail light to your rear rack. - Bracket securely attaches Recon TL 200 / 100 to a rear rack - Compatible with Recon TL 200 and Recon TL 100 only

ILLUMINATING THE FUTURE The Recon+ tail light can switch to a lower intensity light that avoids blinding fellow riders on the group ride. Features - Three super-powerful LEDs from world-famous manufacturer OSRAM - Two steady beam modes, three flash beam modes and - Group Ride beam mode with different level lumen output for variable use and run time - Pairs to activate Group Ride beam mode that switches to a lower intensity to avoid blinding fellow riders on the group ride - Compatible with ANT+ and Bluetooth devices - Easy-to-read LED power indicator on side displays the current power or recharge status (70~100% - Green; 30~70% - Orange; 0~30% - Red) - USB-C charging port

- Powerful COB 50 chip LED - Micro-USB charging cable included - Weather-tough water resistant design - Flashing low battery indicator - Dual orientation universal rubber bracket

When you find yourself out in the dark, Endura's Luminite LED Snap Pack is an quick way to enhance your visibility to others. It offers 3 phases of flash frequency and can operate for up to 50 hours on a single coin cell battery. Endura includes both a seat post clip and a clothing S-Clip, so you can position this versatile light wherever is easiest.

With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs

Charge, Click, Go Bright And Easy Batteries, what a hassle. This small-but-mighty safety light set is rechargeable, so you’ll never have to change batteries again. Just charge with the micro-USB cable and attach using the handy silicone mounts. Then click once for power, and traffic can see you! - High 60 lumen - High 20 lumen - Versatile Silicone Mounting System - Waterproof To IP-65 Standard. - 3 Hour Recharge Time.

Want to hit the local trail for a midnight shred, or commute home on a November evening? The sleek and tiny Dayblazer 1500 has you covered. MEET THE NEW CHAMP! This little devil packs a 1500-lumen punch onto a tiny bar perch. Weighing in at just 140 grams, this light hits way above its weight class. Gone are the days of a 10-watt halogen bulb and a bulky water-bottle-shaped, lead acid battery pack. Now we've got it all wound up in a tiny bar-mounted front light! Want to hit the local trail for a midnight shred, or commute home on a November evening? The sleek and tiny Dayblazer 1500 has you covered. Featuring our eye-popping BLITZ Daytime Running Mode to grab the attention of cars, an action-style camera mount, ample side visibility and IP-67 submersibility, the Dayblazer 1500 is your new best riding buddy. - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Brightness: Up to 1,500 lumens - Country of Origin: China - Recharge Time: 5-hour recharge - Mounting Options: Universal Mount - Action-camera-style mount fits most helmets and handlebars 22–35mm in diameter - Weight: 140 grams Run Time: - Blitz mode: 2 hour at 1,500 lumens - High mode: 3 hours at 750 lumens - Low mode: 6 hours and 400 lumens - Pulse mode: 10 hours at 270 lumens - Strobe mode: 15 hours at 120 lumens Water Resistance: - IP-67 submersible - Ingress protection rating, or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 Standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.

Blazing on a budget is how we should describe this light set. Featuring the Dayblazer 550 front light and the Dayblazer 65 rear light, this combo will get you noticed without breaking the bank. THE PERFECT COMMUTER LIGHT SET. Get noticed without breaking the bank. Both lights are spec'd with eye-catching BLITZ Daytime Running Mode and a multitude of mounting options. Perfect for city riding. - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Brightness: Up to 550 lumens front, 65 lumens rear - Country of Origin: China - Recharge Time: 3-hour recharge (front)/2-hour recharge (rear) - Mounting Options: Universal Mount - Action-camera-style mount fits most helmets and handlebars 22–35mm in diameter (front)/Versatile mounting system (rear) - Weight: 177 grams (front 129g, rear 48g) Run Time : - Blitz mode (front): 1 hour at 550 lumens - High mode (front): 1.5 hours at 275 lumens - Low mode (front): 5 hours at 75 lumens - Pulse mode (front): 5.5 hours at 100 lumens - Strobe mode (front): 12 hours at 65 lumens - Solid mode (rear): 1 hour at 50 lumens - High flash/Strobe mode (rear): 3 hours at 65 lumens - Low flash/Strobe mode (rear): 6 hours at 35 lumens - Group Ride mode (rear): 20-25 hours at 3 lumens Water Resistance: - IP-67 submersible - Ingress protection rating, or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 Standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.

The Dayblazer 550's high-power BLITZ daytime running mode and side visibility to grab the attention of cars or light your way through a dark section of the commute. The Grid Rear Light has a wide COB light array and a long run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. The Dayblazer 550 and Grid Rear Light Set offers plenty of rechargeable power to keep you visible while out riding and well-powered to be seen. - USB-C-Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE-Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD-This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Not too long ago a 550-lumen headlight for this price would have been a pipe dream, but now the Dayblazer 550 is a dream come true! AWESOME LIGHT. AWESOME PRICE. Featuring eye-popping BLITZ Daytime Running Mode to grab the attention of cars, IP-67 submersibility and ample side visibility, the Dayblazer 550 puts light where riders need it most. - Lithium Battery Packaged: In Product - Recharge Type: Micro-USB rechargeable — Charges via any standard USB port (charging cable included) - Number of Batteries: 1.00 - Brightness: Up to 550 lumens - Batteries Included: Batteries Included - Lithium Battery Energy Content Watt Hours: 10.1 - Battery Type: Lithium Ion - Country of Origin: China - Batteries Needed: Yes - Recharge Time: 3-hour recharge - Mounting Options: Swivel mount - A rotating mount allows the light to be adjusted to center on the road! This versatile silicone mount fits handlebars from 22–35mm and can be used to strap to some helmets. Universal Light Mount action-camera-style mount sold separately - Weight: 59 grams Run Time: - Blitz mode: 1 hour at 550 lumens - High mode: 1.5 hours at 275 lumens - Low mode: 5 hours at 75 lumens - Pulse mode: 5.5 hours at 100 lumens - Strobe mode: 12 hours at 65 lumens Water Resistance: - IP-67 submersible - Ingress protection rating, or "IP Rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-67 Standard, which means it is totally protected against dust/grit and fully protected against the effects of immersion between 15cm and 1 meter for 30 minutes.

With 2 LEDs pumping out 65 lumens of power, 270 degrees of visibility, and Blackburn's unique BLITZ daytime running mode, the DAYBLAZER 65 is focused on safety, so you can focus on your ride. Also, because of the narrow profile of our unique mounting bracket, the DAYBLAZER 65 tail light can be mounted to just about anything you can think of from round or aero seat posts, to seat stays, to a rear rack, or your back pack - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - TIR Lenses - LED Fuel Gauge/Charge Indicator - Polycarbonite Construction - 2 hour recharge time - Runtime: Solid 1.6hrs (50 lumen), High Flash/Low Strobe 3hrs (65 lumen)/6hrs (35 lumen) - 48g

The Grid Front Light has four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid Front Lights offer plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Being Seen From All Angles Has Never Been Easier We understand being able to see in the dark is important, but we also believe that so is being visible to cars. A recent study by the National Highway Traffic Safety Administration (NHTSA) showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). Being seen from all angles while cycling has never been easier. The Grid Side Beacon was imagined to work in with head/tail lights to keep you more visible from a full 360 degrees. Designed to be mounted to either side of your fork with reusable silicone straps, the Grid Side Beacon can be used as a stand-alone light, or as part of our Luminate 360 Light Set. Spec'd with eye-catching amber-colored LEDs, the weatherproof, rechargeable Grid Side Beacon set comes with a dual-headed charger and has a runtime of up to 6 hours for multiple days of commuting illumination. - 58 grams - Charges via any standard USB port - ip-65 submersible - ingress protection rating or "IP rating," is a techy way to describe the level of water- and dust-proofness of a product. this light meets the IP-65 standard, which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction. - High/Solid 85 lumen, 1.5 hr runtime; Low/Solid 50 lumen, 3 hr runtime; High/Flash 85 lumen, 3 hr runtime; Low/Strobe 50 lumen 6 hr runtime

Attaches Blackburn Local Lights to any rack.

Being Seen From All Angles Has Never Been Easier We understand being able to see in the dark is important, but we also believe that so is being visible to cars. A recent study by the National Highway Traffic Safety Administration (NHTSA) showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). With the Luminate 360 set, being seen from all angles while cycling has never been easier. The grid side beacon was imagined to work in with head/tail lights to keep you more visible from a full 360 degrees. While the grid side beacon can be used as a stand alone light, we believe it works best as part of our Luminate 360 light set. The Dayblazer 400 front light and the 65 rear are spec'd with blitz mode to keep you bright enough to be seen, day or night. - 165 grams (140 front, 48 rear, 58 side) - 4 Lithium polymer/lithium ion batteries included - Rear: Solid 50 lumen, 1.6 hr runtime; High Flash 65 lumen, 3 hr runtime; Low Strobe 35 lumen, 6 hr runtime - Side: High/Solid 85 lumen, 1.5 hr runtime; Low/Solid 50 lumen, 3 hr runtime; High/Flash 85 lumen, 3 hr runtime; Low/Strobe 50 lumen 6 hr runtime - Front: Blitz 400 lumen, 1 hr runtime; Low 200 lumen, 1.5 hr runtime; Pulse 200 lumen, 6 hr runtime; Strobe 200 lumen, 10 hr runtime - Charges via any standard USB port (charging cable included) - IP-65 Submersible - ingress protection rating or "IP rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-65 standard, which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction.

Meet TRACKR RADAR, an all-in-one tail light and radar built to keep you aware, visible, and in control. With real-time vehicle detection, adaptive lighting, and seamless integration with ELEMNT bike computers and the Wahoo App, it enhances your ride without adding distractions. Its sleek, road-ready design, long-lasting battery, and versatile mounting system ensure confidence in every mile. Stay alert, see what’s coming, and ride with total focus. TRACKR RADAR Experience: - Vehicle Detection: Alerts you to approaching cars up to 150m (164 yards) behind. - In-Ride Alerts: Real-time notifications on ELEMNT bike computers, compatible bike computers, and fitness watches. - Mode Memory: Saves your last-used light mode for convenience between rides. - *Brake Light: Increases luminosity when braking to alert approaching traffic*. - *Quick Alert: A continuous flash pattern signals when a car enters the radar’s detection zone*. - *Battery Extender Mode: Reduces luminosity to conserve battery when no vehicles are detected. *Settings can be turned on/off within Wahoo App to allow for compliance to regional traffic regulations. Connectivity & Control - ANT+ Smart Light Control: Manage the device hands-free via ELEMNT bike computers. - Wahoo App Control: Pair TRACKR RADAR, update firmware, and customize light modes effortlessly. - Compatible Devices: Connects with Wahoo ELEMNT bike computers and select other bike computers and fitness watches. Hardware & Design: - Dual LED Design: Maximizes brightness and enhances visibility. - Versatile Mounting: Quick-connect strap and quarter-turn mount fit a wide range of bikes. - Weatherproof Build: IPX7-rated for water resistance up to 1 meter for 30 minutes. - Lightweight & Compact: Weighs just 99g (3.5oz).

Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz

For CubiCubi 500 / 850 / 1200 - Charges two batteries simultaneously

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Topeak's HeadLux helmet light is the Siamese twin of bike lights. This one light does double duty with two super-bright LEDs facing forward and two red LEDs facing the rear. Its 3 modes and wrap around lenses ensure you'll be seen. A nice supplement to your regular light set, the HeadLux is a convenient way to add extra safety to your commute. Plus, batteries are included.

Ride safe and be seen at night with the high-performance helmet light. Innovative double-sided helmet-mounted light shines white facing forward and red towards the rear, and features 4 LEDs for excellent visibility. Rubber straps provide easy installation and flexible mounting options on a helmet. - Max Luminous Intensity: 140 Lumens (Front), 10 Lumens (Rear) - Lamp: 2 white high power LED’s (Front), 2 red high power LED’s (Rear) - Battery: 3.7V 680mAh Lithium Ion (integrated) - Control/Burn Time (approximate): 3.3hr (High), 5.5hr (Middle), 33hr (Low), 28hr (Front: Middle / Rear: Blinking) - Charge Time (approximate): 2hr / Micro USB - Input: 5V 500mA - Lamp Housing: Injection molded polymer - Strap Mount: Fits helmet / road bike dropbar - Waterproof: IPX 6 - Low battery indicator - Size: 6.9 x 4.4 x 2cm / 2.7” x 1.7” x 0.8” - Weight: 40g / 1.41oz

Replacement Part – Oversized Handlebar Bracket (35mm) - Reinforced internals take more abuse - Fits oversized 35mm mtb bars - No tools needed - Included with USL-1100 & USL-1500 - Weight: 40 grams - Works for all Serfas headlights except for: SL-200, SL-30WP, & SL-40WP

The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt

- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

The NiteRider Bullet offers excellent rear light projection and daytime visibility with Optimal VIZ. Keep tabs on battery life with the integrated low power indicator. - 200-lumen output - Group Ride Mode—be seen without distracting fellow cyclists - Varying steady and safety flash modes - USB rechargeable - FL1 Standard IP64 Water Resistant

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

The NiteRider Double Taillight Rack Mount allows for the installation of 2 NiteRider taillights. It attaches securely with the rack mount for that perfect fit. It features a quick release tab on each mounting point that allows you to remove just your taillight, leaving the whole mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. SYSTEM COMPATIBILITY - Sentinel - Omega 330 - Solas - Sabre - CherryBomb - TL 5.0 SL - Vmax+ 150 NOT COMPATIBLE WITH Emax+ 150, OMEGA 300, SENTRY AERO 260, AND BULLET 200 TAILLIGHTS

The NiteRider Double Taillight Seat Post Mount allows for the installation of 2 NiteRider taillights. It attaches securely with the clamp mount and rubber shims for that perfect fit. Fits seat posts with a 22mm-34.9mm diameter. It features a quick release tab on each mounting point that allows you to remove just your taillight, leaving the whole mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. SYSTEM COMPATIBILITY - Sentinel - Omega 330 - Solas - Sabre - CherryBomb - TL 5.0 SL - Vmax+ 150 NOT COMPATIBLE WITH Emax+ 150, OMEGA 300, SENTRY AERO 260, AND BULLET 200 TAILLIGHTS

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

The Explorer headband adjusts to various head shapes and sizes. System Compatibility: - Explorer 350 - Pro Series - HID Series - Classic Plus & Seclect - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

The NiteRider Hardshell Helmet Mount gives you the option to mount your head light directly onto your hardshell helmet using high strength 3M VHB adhesive. ?Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

AC Adapter for the NiteRider Lumina Dual 1800 Front Bike Light. Recharges a completely depleted battery in 3 hours. SYSTEM COMPATIBILITY Lumina Dual 1800 LED Head Light

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. - Low cost, high powered light - Highly visible in traffic = keeps you safe - 3 light settings – High, Low and flash - Tough durable design - Lumen Output: 250 - Run Time: 12:30 – 28:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

We understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, and that's why we created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. For much of night riding, the key to survival is not only seeing but also being seen, the CherryBomb 100 addresses the latter. By incorporating a unique multi-directional collimator specifically designed for cycling, the CherryBomb 100 maximizes visibility by dispersing light to the sides of the rider as well as to the rear, effectively eliminating blind spots to upcoming automobiles. To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector which allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included, for flexible mounting options. Mako 250 - Low cost, high powered light - Highly visible in traffic = keeps you safe - Run Time: 7:00 – 28:00 hours - 3 light settings—High, Low, and Flash - Tough durable design - Water / Dust Resistant IP64 Rated CherryBomb 100 - Daylight Visible Flash (DVF) - Up to 136 hour run time - Visible up to 1 mile - Internal reflector = visible if light in off mode - Easy to operate AAA batteries - Super bright day time flash mode - Be Seen by cars = Be Safe - Water / Dust Resistant IP64 Rated

The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

For those that ride with the sleek performance of Aero handlebars, NiteRider offers a GO Action Camera mounting solution. With the proper strap tension set, the Aero Handlebar Mount is secured in to place delivering a high degree of stability by way of the soft rubber pad under the mount. Enjoy all the benefits of Aero handlebars, while being able to mount your Go Action Camera to record all your adventures! FEATURES - Fits all Aero style handlebars. - Stable and secure accessory mount. - Lifetime Guarantee against material or manufacture defects. - Damages due to abuse or crashing excluded. - Weight: 30 g