Accessories/Parts

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Thule's Load Bar End Caps are replacement end caps for rectangular load bars.

Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 6 locks, all using the same key

Easy-to-install foot for Thule Edge roof racks, for vehicles with raised railings. - Easy-to-install roof rack feet - For vehicles with raised railings - For Thule Edge roof rack systems - For raised railings Features: - Load carrier feet for Thule Edge roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Rubber lining protects the surface of the raised railings - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Trail Doc accessory kit for the NV Base 2.0 rack from Kuat Racks.

- Installs easily in a truck bed or anywhere else you need a simple fork mount carrier

Coupler for 1-7/8 " balls for RACKandROLL trailer.

Yakima's 1A HighRise Spacers convert their standard 1A RainGutter Towers (sold separately) into HighRise towers for more clearance. They give a rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks).

Coupler for 2" balls for RACKandROLL trailer. Product Specs: - Weight: 4.12 lbs. - Dimensions: L 11.00 in x W 3.90 in x H 5.00 in - Limited One Year Warranty

End caps for 86" Cross Bars. Includes four end caps Please note these end caps are specific to the 86" cross bar.

Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.

Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty

Go sleek with this low-profile t-slot awning bracket and mount up your awning with more options. This hardware kit replaces the standard mounting hardware of your awning and gives you multiple height settings to help you dial in your preferred look, including a rear deploy option. Product Details - ?Configurable in multiple height settings to allow a custom position on your vehicle. - T-slot design for easy attachment to Yakima HD Bar, JetStream, LockNLoad Platform and other standard t-slot crossbars - Rear deploy compatible with SlimShady 4.5 on a LockNLoad platform or HD Bar - Heavy-duty steel construction with durable, powder-coated finish - Compatible with all Yakima SlimShady awnings Product Specs - Weight: 3.78 lbs. - Dimensions: L 5.75 in x W 3.25 in x H 4.65 in

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Specifically tailored to fit the SkyRise mattress, these soft sheets let you bring the comforts of home on your next rooftop camping adventure. The cozy 300 thread count sheets come as a set - fitted, flat, 2 pillowcases - and are made of 100% GOTS certified organic cotton. The fitted sheet won't budge during the night and the top sheet's pocketed end makes for easy bed making in the morning. Plus, you can leave them on your SkyRise mattress when you take down camp and hit the road. Product Details: - Sheet set specifically tailored to fit the Small SkyRise rooftop tent mattress - Full sheet set, including fitted sheet, flat sheet, and 2 standard pillowcases - 300 thread-count sheets are made of soft, comfortable 100% GOTS certified organic cotton - No tuck design on the flat sheet makes for easy bed making in the morning - Includes drawstring bag for easy storage away from camp Product Specs: - Weight: 3.30 lbs - Dimensions: L 84.00" x W 48.00" x H 3.00"

This simple kit easily adapts our OverHaul HD™ and OutPost HD™ truck rack systems to work seamlessly with Yakima HD Tracks—without sacrificing the rack’s 500-lb. on-road carry capacity or its exclusive new 300-lb. Yakima Off-Road Rating (Weight ratings will vary based on application). - Complete kit that works on Yakima HD Track - Designed specifically for OverHaul HD and OutPost HD truck rack systems - Build to last, with aluminum and corrosion-resistant hardware - Maintains both OverHaul HD and OutPost HD 500-lb. on-road and 300-lb. off-road ratings (weight ratings will vary based on application)

A permanently mounted bracket that allows 1A Raingutter Towers or Q Towers to be used in some situations where no raingutters exist. Installed with carriage bolts, washers, and lock nuts. - Stainless steel hardware included - If you are attempting to use QTowers and our bolt top loader for your vehicle you will need a pair of Q41 clips, sold separately. - Sold as pairs Product Specs: - Weight: 1.00 lbs. - Dimensions: L 7.10 in x W 2.50 in x H 0.75 in - Limited Lifetime Warranty

Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty

Cook it up quick with this 2-burner propane stove, with push-button ignition for easy cooking in the outdoors. PRODUCT DETAILS - Two powerful 14,000 BTU/HR stainless steel burners - Precision control valves for easy adjustment of burner heat - Included push-button piezo ignition - Easy latching lid stays securely closed - Easy to clean stainless steel drip tray and removable nickel-chrome coated burner grate PRODUCT SPECS - Weight: 9.50 lbs. - Dimensions: L 21.50 in x W 13.00 in x H 3.75 in - Limited Two Year Warranty